Intumescent Fire and Smoke Seal 15mm
INTUMESCENT FIRE AND SMOKEĀ SEAL 15MM
Suitable forĀ Fire Doors
05CP277 (Available in retail and contract packaging)
- Fire and cold smoke seal
- 45 minute fire resistance
- Certified to BS 476 Parts 22 and 31.1
- Easy to fit with self adhesive backing tape
- 10mm with 30 minute fire resistance also available- 05CP064 Intumescent Fire and Smoke Seal 10mm
- Also available without nylon brush- 05CP276 Intumescent Fire Seal 15mm
- PVC casing containing intumescent strip, with 4mm nylon brush
Additional Information
Colours
-
Brown
-
White
Sizes
- 2100mm
Fixing
- Check that the gap between the door and the frame on the sides and the top is ~3mm.
- Rout a 15mm wide x 4mm deep groove in the door frame (or if not possible on the door edges).
- Remove backing tape from the seal and press into the groove.
- Check that the brush seal is in contact with the door, and that the door can open and close.