JavaScript appears to be disabled. Funtionality of this website may be limited.
Learn how to enable JavaScript

Intumescent Fire and Smoke Seal 10mm

Intumescent Fire and Smoke Seal 10mm

Additional Images

INTUMESCENT FIRE AND SMOKE SEAL 10MM

Suitable for Fire Doors

05CP064 (Available in contract packaging only)

Fire and cold smoke seal
30 minute fire resistance
Certified to BS 476 Parts 22 and 31.1
Easy to fit with self adhesive backing tape
15mm with 45 minute fire resistance also available- 05CP277 Intumescent Fire and Smoke Seal 15mm
Also available without nylon brush- 05CP063 Intumescent Fire Seal 10mm
PVC casing containing intumescent strip, with 4mm nylon brush

Additional Information

Colours

Brown
White

Sizes

2100mm

Fixing

Check that the gap between the door and the frame on the sides and the top is ~3mm.
Rout a 10mm wide x 4mm deep groove in the door frame (or if not possible on the door edges).
Remove backing tape from the seal and press into the groove.
Check that the brush seal is in contact with the door, and that the door can open and close.